HPU Installation

HydraFiber Processing Unit Technical Bulletin: Panel Installation

Instructions for installing the HPU panel. This must be done after conveyor installation. Questions on your AgriNomix HydraFiber equipment? We're here to help. Contact our tech specialist Nate Carney anytime at 229-392-8807 or ncarney@profileproducts.com.

Download pdf

"We are already using HydraFiber Ultra in our blends for indoor production, and decided to trial EZ Blend for outdoor production. Our Fall 2019 mum trial put EZ Blend side by side with a 30% Ultra 160WB blend. The plants performed very well in EZ Blend – we couldn’t see a difference."

Seweryn Uchacz

Head Grower

Garden State Growers, Pittstown, NJ

“It’s often said that the definition of insanity is doing the same thing over and over and expecting a different result. Without change, we won’t get new results, so when we heard about HydraFiber, we knew we had to give it a try.”

Chris McCorkle

Operations Manager

McCorkle Nurseries, Dearing, GA

“Since raising our inclusion rates, we’ve had no issues with the quality of our plants.”

Jeff Murphy

Operations Manager of Production and Maintenance

Altman Plants, Giddings, Texas

“You’re getting the same thing you’re getting from perlite or vermiculite, but you’re also getting more air porosity, more water-holding capacity, and better plant performance, so it really makes sense to switch to a HydraFiber blend.”

Mike Spitzner

General Manager

Charles Spitzner Nursery, Long Island, New York

"The transition to HydraFiber was so easy. I have 25 people on my growing staff and each one had no problem moving from a standard perlite mix to the HydraFiber mix. Things like Bonzi drenches…same rates. pH improved. EC was right there, too. Water management is straightforward and simple. No challenges for the growers whatsoever."

Paul Hardiman

Head Grower

Dan Schantz Farms & Greenhouses, Zionsville, PA